WHICH ASBESTOS SURVEY YOU NEED · CAR 2012 REGULATIONS 4 AND 5
A management survey finds the asbestos that could be disturbed by normal use and routine maintenance, and it is how the duty to manage under Regulation 4 of the Control of Asbestos Regulations 2012 gets discharged in a building that stays in use. A refurbishment and demolition survey is fully intrusive, covers everything in the area affected by the planned work, and is what Regulation 5 requires before anyone breaks into the fabric. They are not grades of the same thing: they have different purposes, different coverage and different consequences for being wrong. Both are carried out to HSE guidance HSG264.
An R&D survey is not a better management survey. They answer two different questions, and holding the wrong one is not even a partial answer.
The regulation that applies decides the survey. If the building is in use it is Regulation 4; if you are about to disturb the fabric it is Regulation 5.
A survey covers what it says it covers. The commonest failure is assuming a management survey looked somewhere it never claimed to look.
Some jobs need one sample, not a survey. We will tell you that before we quote, because getting this wrong is expensive and the cost falls on you.
The Difference
A management survey is carried out in a building that carries on being used. The surveyor locates asbestos-containing materials that could be damaged or disturbed by normal activity and by foreseeable maintenance, assesses their condition, and records them. It involves some intrusion — lifting an accessible ceiling tile, opening a service riser door — but it stops where a reasonable person would stop in an occupied building. It is not a search of the structure.
A refurbishment and demolition survey is the opposite proposition. It is carried out ahead of work, it is fully intrusive, and it is meant to find everything in the area the work will affect — inside walls, above ceilings, under floors, inside plant and ducts. It usually means the area is empty, it frequently causes damage in the course of looking, and it ends with the area needing making good. That is not a failing of the survey; it is the survey doing its job.
Which Applies
Most enquiries are one of these four. If none of them fits, call and describe the job.
You occupy it, maintain it and are responsible for it. You need a management survey and the register, risk assessment and plan that follow from it.
Anything that breaks into the fabric — a strip-out, a wall coming down, a new riser. Regulation 5 wants the area identified before the work starts.
A single material you are about to disturb. That is a sample, not a survey, and anyone quoting you for a full survey should explain why to you.
You hold a management survey but the condition has moved on. That is a re-inspection, which is cheaper and faster than starting again.
The Expensive Mistake
The costly error is almost never choosing an R&D survey when a management survey would have done. It is the reverse: arriving on site with a management survey, treating it as a clearance to start work, and opening something it never looked at. Work stops, the area is secured, an analyst comes out, and what would have been a planned day becomes an incident with a report attached — and the refurbishment survey still has to be done afterwards, now against a deadline.
The mechanism is almost always the same. A management survey report says plainly what it did not cover, and that section is the one nobody reads. Ceiling voids, floor voids, the inside of partitions, plant internals and buried services are routinely outside its scope. In our experience the duty holders who get caught out are rarely careless; they simply did not recognise the limits of the survey they held, and let work start in areas it had never reached. The fix costs nothing: read the scope and limitations section before you let anyone start.
Coverage
Inside a management survey. Offices, corridors, plant rooms and stores are inspected as they are used, lifting a tile or a hatch at the most. Nothing is opened up.
Usually in a management survey, so far as they open without tools or damage. Ceiling voids behind fixed panels and sealed risers are often listed as not accessed.
Only an R&D survey breaks into walls and partitions. A management survey records the surface and presumes or excludes what is behind it, and the report must say so.
R&D only. Coverings are lifted and screeds cored where the work will reach them. A management survey records the visible finish and stops there, however old it looks.
R&D only, usually with the plant isolated first. Gaskets, ropes and duct linings inside boilers, calorifiers and air handlers are rarely visible from outside in normal use.
Either survey may presume a material rather than sample it. A presumption is a legitimate outcome and goes in the register; one sample resolves it before disturbance.
The dividing line is not how hard the surveyor looks. It is whether the building is being used or taken apart.
Before You Commit
Ask the surveyor which regulation the work is under. If they cannot say Regulation 4 or Regulation 5 and explain why, that is worth knowing early.
Every survey has a scope and limitations section. Ask for it before the survey, not with the report, and ask what will be presumed rather than sampled.
Bulk samples should go to a UKAS-accredited laboratory to ISO/IEC 17025. Ask which one, and ask whether the certificates come back with the report.
The Legal Position
Regulation 4 of the Control of Asbestos Regulations 2012 places the duty to manage on whoever is responsible for maintaining non-domestic premises. It requires them to find out whether asbestos is present and in what condition, to presume it is present where there is no strong evidence otherwise, to record what they find, assess the risk, prepare and act on a written management plan, review it, and make the information available to anyone liable to disturb the material. A management survey is the ordinary means of discharging the first limb of that duty.
Regulation 5 is a different obligation with a different trigger. Before any work which exposes or is liable to expose anyone to asbestos, a suitable and sufficient assessment must be carried out as to whether asbestos is or may be present — which in practice means identifying asbestos in the area the work will affect, before the work begins. That is what a refurbishment and demolition survey is for. The two regulations sit alongside each other: holding a current management survey does not discharge Regulation 5, and an R&D survey of one wing does not discharge Regulation 4 across a building.
Approved Code of Practice L143 explains how both are met and carries special legal status — following it is not compulsory, but failing to follow it is treated as evidence of a breach unless compliance is shown another way. HSE guidance HSG264, Asbestos: The Survey Guide, governs how surveys are carried out, what they must record and how their limitations must be stated. A fuller account of HSG264 is on our HSG264 guide; the duty itself is on duty to manage asbestos.
Author: Gordon Ringland, Founder and Director, BOHS P402. Reviewed 13 November 2026.
Areas We Cover
Based in Great Wakering near Southend-on-Sea, we cover Essex, London and the wider South East.
The choice between the two surveys comes up most often in pre-2000 trade and industrial units off the A127, where the end of a lease brings a strip-out and the management survey on file stops being enough. In Southend’s town-centre retail, shop-fit programmes are often booked before anyone asks which survey is held. And in office-to-residential conversions across south Essex and east London, the file usually holds a current management survey while the plan is a full soft strip — which calls for an R&D survey, not a re-inspection.
Get in Touch
Describe the building, roughly when it went up, whether it is occupied, and what you are planning to do to it. That is usually enough for us to tell you which survey applies, or that you need a sample rather than a survey. If a contractor has told you that you need something, say what they asked for and we will tell you whether they are right.
Ora Asbestos Management Ltd
Unit 6, Crouchmans Yard, Poynters Lane,
Great Wakering, Essex, SS3 9TS
Hours: Monday–Saturday, 6am–6pm · Closed Sunday
Not reliably. An R&D survey covers the area the work affected, to the depth the work required, and says so. If that area is the whole building and the report is current, it may well serve — but it is a question for the surveyor who wrote it, not an assumption to make.
No, and this is the commonest misunderstanding on this page. A management survey tells you what is in the rooms you use. Regulation 5 wants the area identified before work that could disturb asbestos, and a management survey does not do that.
There is no expiry date in the regulations. What matters is whether the record still reflects the building. Condition changes, refurbishments happen and material gets damaged, which is why re-inspection is normally annual by convention rather than by law.
That the surveyor did not sample the material and has recorded it as asbestos-containing until proved otherwise. That is a legitimate outcome and a conservative one. It can be resolved later with a sample if the material is going to be disturbed.
Usually not, but you need to be able to show why. The duty does not disappear because of the date; it is satisfied by strong evidence that no asbestos is present, which for a genuinely post-2000 building is normally the construction date and the basis for that conclusion.
Someone competent to do it, which HSG264 sets out in detail and which in practice means appropriate training, qualification and experience — commonly BOHS P402 for surveying. Ask what the surveyor holds before you book, for either type.
Usually yes, in a controlled way — opening ceilings, lifting flooring, breaking into partitions. That is the point of it. Agree making good before the survey, because an unexpected bill for plasterwork sours an otherwise straightforward job.
Then the survey may no longer cover the area affected, and that needs checking rather than assuming. An extended scope is a common reason for a supplementary survey, and it is far cheaper than stopping work halfway.
Cookies on this site
We use strictly necessary cookies to make this site work. With your permission we would also like to use analytics cookies to see how the site is used so we can improve it. You can change your choice at any time. See our cookie policy.